Submersible pumps for tanks

SFA offers a complete range of pumps for lifting stations called Sanipump. In the dilaceration or vortex version, with a single or three-phase motor, the range covers all the needs for lifting black water, grey water, wastewater, and stormwater. These pumps can be installed in dedicated SFA stations, existing storage tanks, or even concrete tanks.

Contact Us

hotline-new.pngchat-zalo-atlantic.png
Filter by

Install

Devices to be connected

SANIPUMP GR/VX

SANIPUMP GR/VX

The independent pump for an existing tank Independent operation. Excellent...

Sanipump ZPG 71

Sanipump ZPG 71

Cast iron submersible pump : Drainage and Storm Water Pumping Can be...
  • Individual use
Sanipump ZFS 71

Sanipump ZFS 71

Cast iron submersible pump : High head Lifting of septic tanks, collective...
Sanipump SLD 700

Sanipump SLD 700

The rainwater pump High flow rates: up to 48 m3/h Regime S1 submerged...

SFA offers a whole range of lifting pumps for lifting stations called Sanipump. In the dilaceration or Vortex version, with a single or three-phase motor, the range meets all the lifting needs for black water, grey water, wastewater, and rainwater. These pumps can be installed in dedicated SFA stations or existing or custom-made concrete tanks.

Sanipump GR and VX are compact and light portable pumps (only 13 kg) for domestic wastewater such as WC, bathroom, kitchen, or laundry, accepting water up to 70° C (5 minutes maximum).

Thanks to the float activation system, the operation is entirely autonomous.

The Sanipump pump for lifting stations is available in two versions:

Sanipump GR is equipped with a Pro X K2 knife dilaceration system. It evacuates water in a small diameter (DN 40), up to a height of 14 m with a flow rate of up to 15 m³/h.

Sanipump VX is equipped with a Vortex impeller; it evacuates the wastewater through a 50 mm diameter outlet and lifts to 13 m height with a flow rate of up to 27 m³/h.

Sanipump ZPG 71 is a cast iron submersible pump for pumping grey water (drainage water and rainwater in S1 mode), with a maximum lifting height of 31 m and a free passage of 40 mm.

Sanipump ZPG 71 is a pump for lifting stations, but it can also be installed in a manhole or a pit.

All accessories are available for installation on the ground or a base plate.

Sanipump ZPG 71 is compatible with Sanifos 1600/2100/3100 and is available in 4 versions (1 single-phase and three-phase).

Sanipump ZFS 71 is a cast iron submersible pump for pumping wastewater (collective sanitary or public facilities) with a high head of 39 m.This pump is compatible with the Sanifos 1600, 2100, and 3100 lifting stations.

Equipped with a high-performance dilaceration system and a double mechanical seal, it is available in 5 versions, single-phase and three-phase, with a lifting height of up to 39 m, depending on the model.

All the accessories are available for installation on the ground or a base plate.

Sanipump SLD is a pump for lifting stations dedicated to rainwater. It has been designed for high flow rate rainwater (48 m³/h). It has a two-channel impeller with a free passage of 50 mm.

Sanipump SLD is available in 3 models, single-phase or three-phase:

  •        ◾ Sanipump SLD 700 S: single-phase pump
  •        ◾ Sanipump SLD 700 SA: single-phase pump with float switch
  •        ◾ Sanipump SLD 700 T: three-phase pump

SFA offers a tailor-made offer with the choice of components according to your needs.

Available in a version without a base plate for easy installation or on guide bars with a coupling system.