Sanisub 400

Sanisub 400

SANISUB 400 for cellar drainage, pumping water from sumps and living areas :

  • Cellar drain pump
  • Lifting height of 7.5M
  • Automatic float release
  • Integrated check valve






  • Individual use

Your documents - Particular

SANISUB 400 is the simple and effective solution for immediate use with its integrated release arm. You plug it in and it will start and stop by itself. With its 10mm granulometry and its 7.5M lift it will be able to cope with occasional flooding.

Column 0
Application Individual use
Pump body PP GF
Shaft Stainless steel
Waterproofing NBR
Motor body Stainless steel
Wheel PA 6 GF
Electrical Specifications
Voltage 230 V
Frequency 50-60 Hz
Power input P1 400 W
Power output P2 180 W
Motor Speed (RPM) 2800
Electrical class I
Immersion depth 7 m
Power cable: Length 10 m
Max. TDH 7,5 m
Max. flow 7 m³/h
Discharge diameter G 1"1/4 inches
ON/OFF level 200/50 mm
Granulometry 10 mm
Max. permissible temperature of the pumped liquid 70°C (5 min)
Wheel type Multi-channel wheel
Type of interlocking Float
Identification & Logistic
Gross weight 4,6 kg
EAN Code 3308815081632
Factory code SANISUB-005