Free Standing Lifting Stations (Sanicubic & Sanicom)
Sanicubic 1 GR
Sewage water lifting pump for multiple fixtures. The Sanicubic 1 GR is an IP68 rated sewage water lifting pump that can take wastewater from multiple kitchen and bathroom fixtures. The pump can lift wastewater up to 39 m vertically, making it ideal for small commercial environments or residential homes with large usage.
Sanicubic 2 GR
Sewage grinder lifting station. The Sanicubic 2 GR is a heavy-duty sewage grinder lifting station ideal for small commercial premises and large domestic dwellings such as villas, pool houses etc. This station is equipped with two pumps with the Pro X K3 dilaceration system, which are activated simultaneously in case of a large supply.
Sanicubic 1 SC
Wastewater lifting station for kitchens and bathrooms. The Sanicubic1 SC is a wastewater lifting station that is ideal for evacuating large quantities of effluent from kitchens and bathrooms. It can handle wastewater from multiple fixtures such as WCs, washbasins, showers, sinks, dishwashers, and washing machines, making it suitable for both residential and commercial usage.
Sanicubic 2 SC
Wastewater lifting station for commercial aplications. The SANICUBIC 2 SC is a two-motor wastewater lifting pump equipped with a single-channel impeller. Designed for commercial applications, it can lift wastewater from public buildings or shopping centres. This lifting station is available in 4 versions. It comes with a pneumatic remote-control box, which includes an audible and visual alarm.
Any questions ?
Sanicom is designed for busy commercial environments and collects grey water from sinks, showers, dishwashers and washing machines. It does not accept toilet wastewater. Sanicubic can collect both grey water and black water, including toilet wastewater, and is suitable for larger or whole-building applications.
Each SFA model has its own maximum vertical lift and maximum horizontal discharge length. Examples: Sanicom 1 — 11 m total head; Sanicom 2 — 15 m total head; Sanicubic 2 Classic — up to 13 m head with 15 m³/h flow; Sanicubic 1 VX and 2 VX — up to 13 m head with 40 m³/h flow...etc Exceeding these specifications, or adding too many bends and elbows, causes the unit to run continuously, evacuate poorly, or overheat. Bends must be smooth, long-radius — not tight elbows. For help confirming the right model for your distance and height, please contact your local SFA-authorized distributor. — SFA Pumps Vietnam aftersales: [email protected] / 0963 080 004.
Sanicubic 2 Classic and Sanicubic 2 VXS are both dual-pump lift stations from SFA's Sanicubic range, positioned for different project profiles. Sanicubic 2 Classic is the standard dual-pump model with the Pro X K2 grinder, suited to typical commercial and residential projects with moderate flow. Sanicubic 2 VXS is positioned for higher flow rate and pressure demands, featuring vortex impellers and a larger free passage that handles more challenging solids. For projects requiring high flow, higher discharge head, or robust solids handling, Sanicubic 2 VXS is the recommended option. For typical mid-volume projects, Sanicubic 2 Classic is sufficient. The sales team can provide both technical datasheets side-by-side for direct comparison. — SFA Pumps Vietnam sales: [email protected] / 0977 889 364.
Sanicom 1 or Sanicom 2 is suitable for collecting commercial grey water. Sanicom 2 includes a standby motor for high-use areas. If the system must also receive toilet wastewater or serve an entire building, a Sanicubic model is more appropriate. Model selection depends on the connected fixtures, usage level and discharge route. Contact SFA Pumps Vietnam sales at [email protected] or 0977 889 364 for advice.
Each SFA model has a documented maximum incoming water temperature. For examples: Greywater lift stations Sanicom 1 and Sanicom 2 tolerate up to 90 °C for short bursts (about 5 minutes). Sanicubic 1 VX, Sanicubic 2 VX, Sanicubic 2 Classic are rated up to 70 °C for short bursts. Sustained operation above these limits damages the unit and voids the warranty. For your specific installation, please refer to the unit's technical datasheet or contact your local SFA-authorized distributor.
For project technical submissions to M&E contractors, design consultants, or project owners, SFA Pumps Vietnam provides a complete documentation package including: (1) product catalog (PDF); (2) Technical Data Sheet (TDS) for each selected model with full specifications; (3) Installation, Operation and Maintenance manual (IOM); (4) Certificate of Origin (CO) and Certificate of Quality (CQ) where applicable; (5) ISO 9001 manufacturer certificate; (6) EN 12050-1/-2/-3 and CE conformity statements; (7) Model selection note justifying the sizing against the project's flow and head requirements; (8) Reference project list of comparable installations. Most documents are available on https://www.sfapumps.vn/en/catalogs; for a tailored submission package for a specific tender, please contact SFA Pumps Vietnam sales. — SFA Pumps Vietnam sales: [email protected] / 0977 889 364.
Sanicom is designed for busy commercial environments and collects grey water from sinks, showers, dishwashers and washing machines. It does not accept toilet wastewater. Sanicubic can collect both grey water and black water, including toilet wastewater, and is suitable for larger or whole-building applications.
Sanicom 1 or Sanicom 2 is suitable for collecting commercial grey water. Sanicom 2 includes a standby motor for high-use areas. If the system must also receive toilet wastewater or serve an entire building, a Sanicubic model is more appropriate. Model selection depends on the connected fixtures, usage level and discharge route. Contact SFA Pumps Vietnam sales at [email protected] or 0977 889 364 for advice.
Each SFA model has its own maximum vertical lift and maximum horizontal discharge length. Examples: Sanicom 1 — 11 m total head; Sanicom 2 — 15 m total head; Sanicubic 2 Classic — up to 13 m head with 15 m³/h flow; Sanicubic 1 VX and 2 VX — up to 13 m head with 40 m³/h flow...etc Exceeding these specifications, or adding too many bends and elbows, causes the unit to run continuously, evacuate poorly, or overheat. Bends must be smooth, long-radius — not tight elbows. For help confirming the right model for your distance and height, please contact your local SFA-authorized distributor. — SFA Pumps Vietnam aftersales: [email protected] / 0963 080 004.
Each SFA model has a documented maximum incoming water temperature. For examples: Greywater lift stations Sanicom 1 and Sanicom 2 tolerate up to 90 °C for short bursts (about 5 minutes). Sanicubic 1 VX, Sanicubic 2 VX, Sanicubic 2 Classic are rated up to 70 °C for short bursts. Sustained operation above these limits damages the unit and voids the warranty. For your specific installation, please refer to the unit's technical datasheet or contact your local SFA-authorized distributor.
Sanicubic 2 Classic and Sanicubic 2 VXS are both dual-pump lift stations from SFA's Sanicubic range, positioned for different project profiles. Sanicubic 2 Classic is the standard dual-pump model with the Pro X K2 grinder, suited to typical commercial and residential projects with moderate flow. Sanicubic 2 VXS is positioned for higher flow rate and pressure demands, featuring vortex impellers and a larger free passage that handles more challenging solids. For projects requiring high flow, higher discharge head, or robust solids handling, Sanicubic 2 VXS is the recommended option. For typical mid-volume projects, Sanicubic 2 Classic is sufficient. The sales team can provide both technical datasheets side-by-side for direct comparison. — SFA Pumps Vietnam sales: [email protected] / 0977 889 364.
For project technical submissions to M&E contractors, design consultants, or project owners, SFA Pumps Vietnam provides a complete documentation package including: (1) product catalog (PDF); (2) Technical Data Sheet (TDS) for each selected model with full specifications; (3) Installation, Operation and Maintenance manual (IOM); (4) Certificate of Origin (CO) and Certificate of Quality (CQ) where applicable; (5) ISO 9001 manufacturer certificate; (6) EN 12050-1/-2/-3 and CE conformity statements; (7) Model selection note justifying the sizing against the project's flow and head requirements; (8) Reference project list of comparable installations. Most documents are available on https://www.sfapumps.vn/en/catalogs; for a tailored submission package for a specific tender, please contact SFA Pumps Vietnam sales. — SFA Pumps Vietnam sales: [email protected] / 0977 889 364.
Buy with confidence
Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Long-term Warranty
2 years for all products.
Technical support
We have certified installers and repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.



