Sanipump SLD 700

Name: Sanipump SLD 700
Brand: SFA

Sanipump SLD is a pump dedicated to high-flow rainwater up to 48 m3/h.

* Submerged S1 mode.
* Rainwater discharge.
* Bi-channel wheel with 50 mm free passage.
* Single-phase or three-phase versions.
* Foot or coupling system.

Find out more

Product details

Sanipump SLD is a pump dedicated to high-flow rainwater up to 48 m3/h. It is available in single-phase or three-phase with a free passage of 50 mm thanks to its high-performance two-channel impeller. A version with a base foot for installation in a manhole as well as drainage kits and accessories are available. When 2 pumps are installed, it is recommended to install a ZPS control box.

Technical specification

Sanipump SLD 700

Version

Version
Version

Version
Sanipump SLD 700 S

Version
Sanipump SLD 700 SA

Version
Sanipump SLD 700 T

Materials

Shaft
Pump housing
Seal
Foot
Motor housing
Impeller

Shaft
Shaft
Pump housing
Pump housing
Seal
Seal
Foot
Foot
Motor housing
Motor housing
Impeller
Impeller

Shaft
1.4021
Pump housing
EN-GJL-200
Seal
Carbon/Ceramic/NBR
Foot
EN-GJL-200
Motor housing
EN-GJL-200
Impeller
EN-GJL-200

Shaft
1.4021
Pump housing
EN-GJL-200
Seal
Carbon/Ceramic/NBR
Foot
EN-GJL-200
Motor housing
EN-GJL-200
Impeller
EN-GJL-200

Shaft
1.4021
Pump housing
EN-GJL-200
Seal
Carbon/Ceramic/NBR
Foot
EN-GJL-200
Motor housing
EN-GJL-200
Impeller
EN-GJL-200

Electrical features

Socket included
Voltage (V)
Frequency (Hz)
Power consumption P1 (W)
Power output P2 (W)
Revolution per minute (RPM)
Maximum current (A)
IP rating
Electrical class
Motor insulation class
Submerged
Immersion depth (m)
Current
Length of cable-control box (m)
Length (m)
Section (mm²)
Type of cable

Socket included
Socket included
Voltage (V)
Voltage (V)
Frequency (Hz)
Frequency (Hz)
Power consumption P1 (W)
Power consumption P1 (W)
Power output P2 (W)
Power output P2 (W)
Revolution per minute (RPM)
Revolution per minute (RPM)
Maximum current (A)
Maximum current (A)
IP rating
IP rating
Electrical class
Electrical class
Motor insulation class
Motor insulation class
Submerged
Submerged
Immersion depth (m)
Immersion depth (m)
Current
Current
Length of cable-control box (m)
Length of cable-control box (m)
Length (m)
Length (m)
Section (mm²)
Section (mm²)
Type of cable
Type of cable

Socket included
No
Voltage (V)
230
Frequency (Hz)
50-60
Power consumption P1 (W)
2000
Power output P2 (W)
1100
Revolution per minute (RPM)
2800
Maximum current (A)
9.2
IP rating
IP68
Electrical class
I
Motor insulation class
F
Submerged
S1
Immersion depth (m)
20
Current
Single-phase
Length of cable-control box (m)
-
Length (m)
10
Section (mm²)
1.5
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
230
Frequency (Hz)
50-60
Power consumption P1 (W)
2000
Power output P2 (W)
1100
Revolution per minute (RPM)
2800
Maximum current (A)
9.2
IP rating
IP68
Electrical class
I
Motor insulation class
F
Submerged
S1
Immersion depth (m)
20
Current
Single-phase
Length of cable-control box (m)
10
Length (m)
10
Section (mm²)
1.5
Type of cable
H07 RN8-F

Socket included
No
Voltage (V)
400
Frequency (Hz)
50-60
Power consumption P1 (W)
2000
Power output P2 (W)
1100
Revolution per minute (RPM)
2800
Maximum current (A)
3.3
IP rating
IP68
Electrical class
I
Motor insulation class
F
Submerged
S1
Immersion depth (m)
20
Current
Three-phase
Length of cable-control box (m)
-
Length (m)
10
Section (mm²)
1.5
Type of cable
H07 RN8-F

Hydraulic

Max. Head. (m)
Max. flow rate. (m³/h)
Discharge diameter DN
Discharge diameter G (inch)
ON Level (mm)
OFF level (mm)
Particle size (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Medium (°C)
Type of impeller
Type of activation

Max. Head. (m)
Max. Head. (m)
Max. flow rate. (m³/h)
Max. flow rate. (m³/h)
Discharge diameter DN
Discharge diameter DN
Discharge diameter G (inch)
Discharge diameter G (inch)
ON Level (mm)
ON Level (mm)
OFF level (mm)
OFF level (mm)
Particle size (mm)
Particle size (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Max. temperature of the pumped liquid (5 min) (° C)
Medium (°C)
Medium (°C)
Type of impeller
Type of impeller
Type of activation
Type of activation

Max. Head. (m)
14
Max. flow rate. (m³/h)
48
Discharge diameter DN
50
Discharge diameter G (inch)
2
ON Level (mm)
-
OFF level (mm)
-
Particle size (mm)
50
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Medium (°C)
-
Type of impeller
Impeller two-channel
Type of activation
-

Max. Head. (m)
14
Max. flow rate. (m³/h)
48
Discharge diameter DN
50
Discharge diameter G (inch)
2
ON Level (mm)
56cm
OFF level (mm)
39cm
Particle size (mm)
50
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Medium (°C)
-
Type of impeller
Impeller two-channel
Type of activation
float

Max. Head. (m)
14
Max. flow rate. (m³/h)
48
Discharge diameter DN
50
Discharge diameter G (inch)
2
ON Level (mm)
-
OFF level (mm)
-
Particle size (mm)
50
Max. temperature of the pumped liquid (5 min) (° C)
40 °C
Medium (°C)
40 °C
Type of impeller
Impeller two-channel
Type of activation
-

Logistics

Gross weight (kg)

Gross weight (kg)
Gross weight (kg)

Gross weight (kg)
32,5

Gross weight (kg)
32,8

Gross weight (kg)
31

General description

EAN code

EAN code
EAN code

EAN code
3308815084015

EAN code
3308815083988

EAN code
3308815084060

FAQs

Any questions ?

Sanipump SLD 700 is a dedicated pump for high-volume rainwater drainage and can be installed in a drainage sump or rainwater lifting station.
The two-channel impeller with a 50 mm free passage allows rainwater containing compatible solids to pass through while maintaining high flow performance and reducing blockage risk.
When two pumps are installed, the ZPS control box is recommended to manage pump alternation, operation and alarms.

Sanipump SLD 700 can reach a maximum flow rate of approximately 48 m³/h. The actual flow depends on the required head and discharge route.
Sanipump SLD 700 is available in single-phase and three-phase versions. It can be installed using a base-foot system or a guide-rail coupling system.

Sanipump SLD 700 is a dedicated pump for high-volume rainwater drainage and can be installed in a drainage sump or rainwater lifting station.
Sanipump SLD 700 can reach a maximum flow rate of approximately 48 m³/h. The actual flow depends on the required head and discharge route.
The two-channel impeller with a 50 mm free passage allows rainwater containing compatible solids to pass through while maintaining high flow performance and reducing blockage risk.
Sanipump SLD 700 is available in single-phase and three-phase versions. It can be installed using a base-foot system or a guide-rail coupling system.
When two pumps are installed, the ZPS control box is recommended to manage pump alternation, operation and alarms.

Quality

Buy with confidence

Made in France
Many products have received the Made in France label.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Long-term Warranty
2 years for all products.
Technical support
We have certified installers and repair technicians.
Experts Since 1958
Creator of the Sanibroyeur macerating toilet.

Sanipump SLD 700

Product details

Sanipump SLD 700

Materials

Electrical features

Hydraulic

Logistics

General description

Any questions ?

Buy with confidence

Made in France

Performance and Reliability

Long-term Warranty

Technical support

Experts Since 1958