Sanipro XR

The SANIPRO sanitary macerator model allows the renovation or creation of a complete bathroom with shower. It has 4 inlets to collect wastewater from:

a WC with a horizontal outlet through its central inlet

a washbasin through its upper inlet

a shower through one of its lower side entrances

and a bidet through another of its low side inlets.

Its integrated pumping system allows it to evacuate this wastewater up to 5 metres high or 100 metres horizontally, and this through a pipe with a diameter of only 32 mm. The SANIPRO, like the other devices in the range, starts up automatically. The system is operated by the pressure of the water entering the tank.

The bathroom appliances (washbasin, shower and bidet) are connected by means of 40 mm diameter pipes. The drainage is carried out through an elbow (included) pre-equipped with a non-return valve. It is recommended to drain in 32 mm, although the elbow is available in various diameters.

The SANIPRO sanitary disposer is equipped with the latest SFA developments in noise reduction. The device is equipped with a series of silent-blocks which absorb most of the transmitted noise. In addition, the device operates with a very short cycle time of 2-3 seconds. This device does not emit any more noise than a refilled external cistern.